Input voltage range: 17-32Vdc
Output voltage: 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.
Intermittent output power as stated, taken for a maximum of 2 minutes followed by 8 minutes rest
Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles
Electrostatic voltage protection Meets ISO10605, ISO14982, >8kV contact, 15kV discharge
Off load current (quiescent current): <15mA
Power conversion efficiency: Typically 90% for non-isolated units, 85% for isolated units, *95%
Isolation: >400Vrms between input, output and case, on isolated products only
Operating temperature: -25°C to +30°C to meet this specification table +30°C to +80°C de rate linearly to 0A
Storage temperature: -25°C to +100°C
Operating humidity: 95% max., non-condensing
Casework: Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533
Connections: Four 6.3mm push-on flat blade connectors *(5 way Phoenix connector including enable on/off terminal and mating half)
Output indicator: Green LED adjacent to output terminals
Mounting method: Click ‘n’ fit mounting clip, fitted separately using three hole fixture * 4 hole cradle
Designed to: EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, and FCC15B.